Interface Torque | Single & Multi-axis force sensors (load cells), Pressure Sensor & Pressure Transmitters, Sensor Instrumentation, Custom Designs and Dynamic Pressure Mapping

Use our live chat service to speak to an operator directly

All Products

1216 Axial-Torsion - Axial Torsion Load Cell

1216 Axial-Torsion

Axial Torsion Load Cell

The 1216 Axial-Torsion load cell measure both force and torsion in the same cell - with either channel capable of being used independently, each channel offers excellent performance and minimal crosstalk.

View product

1516 Axial-Torsion - Axial-Torsion Load Cell

1516 Axial-Torsion

Axial-Torsion Load Cell

The 1516 is a low profile load cell designed for applications where axial and torsion loads need too be measured simultaneously 

View product

2816 Multi-Axis - Flange style multi-axis load cell

2816 Multi-Axis

Flange style multi-axis load cell

The 2816 is the high capacity version of the 1216/1516 for measuring Axial load and Torsion with minimum crosstalk. This unit provides high outputs on both outputs making it very suitable for cyclic applications with large numbers of cycles. The flange style coupling provides a robust method of load attachment and ease of alignment in complex loading systems.

Custom versions have been produced with outputs for Thrust (Z), X-Moment, Y-Moment and Torsion (T) for specialised applications e.g. testing of composite components.

View product

3A, 3 Axis Load Cell - 3 Axis Load Cell

3A, 3 Axis Load Cell

3 Axis Load Cell

The Interface A3, 3 axis load cell measures force simultaneously in three mutually perpendicular axes: X, Y and Z.  This makes it ideal for many industrial and scientific applications, such as robotics, aerospace, automotive, biomechanical and medical research

Each axis supplies an output of 1mV/V and does not require mathematical manipulation. The A3 load cell is built to minimize eccentric loading and cross talk between channels.

The A3 is available in a wide range of capacities from just 10Ns and in five different physical sizes. However, if the standard range does not meet your needs we are happy to work with you on a custom design 

View product

5330 Hollow Flange - Hollow flange reaction torque transducer

5330 Hollow Flange

Hollow flange reaction torque transducer

The 5330 has proven to be an invaluable part of the Interface torque product range. With 11 capacities in 5 flexure sizes this excellent reaction torque transducer will meet the toughest requirements and will give dependable performance. The through-hole design means that cables or other mechanical components can be routed through the centre to keep rig dimensions within tighter limits.

View product

5350 Solid Flange - 5350 Solid flange reaction torque transducer

5350 Solid Flange

5350 Solid flange reaction torque transducer

A compact low capacity reaction torque transducer designed for applications where repeatable low torque measurements are required for example production quality testing of rotary components.

View product

5355 Solid flange - Solid flange reaction torque transducer

5355 Solid flange

Solid flange reaction torque transducer

A compact reaction torque transducer designed for applications where repeatable torque measurements are required for example production quality testing of rotary components. 

View product

5400 Flange Style - 5400 Flange style reaction torque transducer

5400 Flange Style

5400 Flange style reaction torque transducer

The Interface model 5400 reation torque transducer is a highly spec'd flange mount device for when highly repeatable results are needed. It's avaiable in a wide range of capacities to meet your requirements

View product

5600 Axial Torsion - Axial Force Torque Transducer

5600 Axial Torsion

Axial Force Torque Transducer

The 5600 Axial Torsion force and torque transducer is capable of simultaneous force and torque measurements. 

This axial - torsion device offers high performance and accuracy with low cross talk, high stiffness and high resistance to extraneous loads  

View product

6A 6 Axis Load Cell - Multi Axis Load Cell

6A 6 Axis Load Cell

Multi Axis Load Cell

The Interface 6A series of load cells feature six independent, temperature compensated bridges providing mV/V output to six independent channels. This enables measurement in three perpendicular axis with three simultaneous torque measurements about those axis.

The 6A series is available in 5 different sizes to meet you requirements, most with IP67 enviromental sealing.  

Typical applications include

  • Orthopaedic and bio-mechanical research
  • Robotics
  • Aerospace reasearch
  • Automotive testing
  • Wind tunnel test models

View product

9330 Portable Data Logger - Hi-Speed, Data Logger and Display

9330 Portable Data Logger

Hi-Speed, Data Logger and Display

The 9330 is a portable digital display and data logger capable of a 3750 Hz update rate at 24 bit resolution. Data can be saved to SD card at 1000Hz and can be exported to a PC via USB with Windows compatible software.

The 9330 can power up to 4 x350 ohm sensors with the calibration files of up to six being stored. The rechargeable battery offers a 300 hour stand by time with up to 20 hours continuous use.  

The 9330 is a true, portable, high speed data logger and display for force tranducers, load cells and torque transducers 

View product

9850 Indicator - Rotary Torque Digital Indicator

9850 Indicator

Rotary Torque Digital Indicator

The modular design of the 9850's allows the use of 7 different types of input channel cards in 2 available slots. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging. 

View product

AT101 Axial Torsion 0.5kN/5Nm - Low Capacity Force and Torque

AT101 Axial Torsion 0.5kN/5Nm

Low Capacity Force and Torque

The AT101 is a axial torsion transducer capable of measuring both torque and force in a single device.  The AT101 offers high accuracy measurement with low cross talk and a safe overload capacity of 150%  

View product

AT102 Axial Torsion 10kN/10Nm - Force & Torque Sensor

AT102 Axial Torsion 10kN/10Nm

Force & Torque Sensor

The AT102 is a  axial torsion transducer for the measurement of both force and torque in a single device. 

The compact design featuring integral side exit cables makes it ideal for many applications including rheometry testing machines used in rubber testing

View product

AT103 Axial Torsion 20kN/20Nm - Force and Torque Transducer

AT103 Axial Torsion 20kN/20Nm

Force and Torque Transducer

The AT103 load cell offers both force and torque measurement in one compact package. The two bottom exit integral cables enable easy installation.

 

View product

BSC4, 4 channel amp - Four Channel Signal Amplifier

BSC4, 4 channel amp

Four Channel Signal Amplifier

The BSC4 is a compact, 4 channel load cell signal amplifier which is ideal for use with our 3AXX , 3 axis load cell or with up to 4 conventional, single axis load cells.   

The BSC4 can be ordered a choice of with analogue or USB output and will accept 2 or 4mV/V input signals.  Analogue units supplied complete with P.S.U. while USB versions come with Windows compatible data logging and graphing software. 

View product

BSC8,  8 channel digital Amp - Eight Channel Signal Amplifier

BSC8, 8 channel digital Amp

Eight Channel Signal Amplifier

The BSC8 is a multi channel, digital signal amplifier which is the perfect partner to the Interface 6A, six axis force and torque transducer. It can also be used with other multi axis or single axis load cells.

The BSC8 offers a 200k sampling rate with output via USB to a PC.  The BSC8 is supplied complete with windows compatible graphing and logging software, making this the complete package. 

View product

BX8 - Multi - Channel Amplifier  - Eight Channel Digital Amplifier

BX8 - Multi - Channel Amplifier

Eight Channel Digital Amplifier

The BX8 is the latest addition to the Interface range of load cell signal amplifiers.  It is designed to be easy to use by the inexperienced, yet provide a powerful and cost effective tool for the most sophisticated test engineer. 

The BX8 is most suited for use with any transducer with a mV/V output, including load cells, torque transducers and pressure sensors. You can set the BX8 up quickly and easily and collecting data via the supplied data logging and graphing software in moments.

The BX8 is ideal for use with Interface’s range of multi axis sensors. Sensor coefficient matrix can be loaded onto the BX8’s internal software interface with outputs actively scaled according to their outputs.  If purchased with an Interface 6 axis sensor, your system will be delivered to you fully configured and ready to use 

View product

CSC In-line Signal Conditioner - Integral in-line signal conditioner

CSC In-line Signal Conditioner

Integral in-line signal conditioner

The CSC offers the convenience of an in line signal conditioner with the added benifits of CE approval and the enviromental protection of a IP67 rated housing. Cable lenghts are user specified, so can be placed any where in the data path

The CSC is available in voltage, current, RS485 or CAN output versions with upto 1kHz bandwith making it ideal for a wide range of force, torque and pressure transducer applications 

View product

DFI-05L Digital Indicator - DFI-05L MK2 Panel Mount Digital Indicator in PCC1 enclosure

DFI-05L Digital Indicator

DFI-05L MK2 Panel Mount Digital Indicator in PCC1 enclosure

The DFI-05-L is a panel mount indicator designed for use with load cells in either weighing, torque or force measurement applications. Its dual slope 16 bit ADC performs 10 conversions each second with a resolution of 1 part in 63,000 and a maximum sensitivity of 1µV. Load cells can be wired in either 4 or 6 wire configuration and up to 4x 350R units can be connected to each indicator for platform or vessel weight displays. Standard features include Adjustable Filters, Automatic Zero Drift Compensation, Peak and Valley Detection, Display Filter, Last Digit Roundup, In-flight compensation and multiple point calibration with the Lineariser feature (maximum 10 points). 

View product

DIG-USB - USB Output Module

DIG-USB

USB Output Module

The DIG-USB is a compact, high performance mV load cell and torque transducer signal converter with digitizing USB connectivity for your PC.

Connecting the DIG-USB to your PC means that data can be exported from your strain gauge device without the need for amplifiers, filters or other devices. The DIG-USB also provides excitation voltage for your device, eliminating the need for any external power. 

The Windows compatible software enables real time data viewing, data logging, manipulation and setup.

The DIG-USB can be supplied in the IP50 rated ABS enclosure or as a OEM PCB module 

View product

HRDT Wireless Torque Sensor - HRDT (High Resolution Digital Telemetry)

HRDT Wireless Torque Sensor

HRDT (High Resolution Digital Telemetry)

The HRDT system is configured ready-to-run. Simply connect the components together and apply power. Rotor calibration data and system configuration files are backed-up on a supplied USB memory stick. Multiple output modules can be used to provide independently scalable simultaneous dual outputs. Stator-to-output module and PC interconnect cables are included.

View product

INF-USB Signal Amp - USB Output Module

INF-USB Signal Amp

USB Output Module

The INF-USB2 provides an easy interface for collecting data from an Interface transducer directly into your computer. This device makes any Interface load cell or torque transducer USB compatible

The INF-USB is supplied with Window XP and Windows 7 compatible software to enable immediate collectio, evaluation and recording of data with the ability to export data in csv file formats

View product

LCT-1 Ultimate Load Cell Tester - Hand Held Load Cell Tester

LCT-1 Ultimate Load Cell Tester

Hand Held Load Cell Tester

The LCT-1 is a battery powered, hand held tester that can be used to test load cells or any strain gauge torque transducer or pressure sensor.

The LCT-1 is easy to use with linearity and repeatability tests carried out without user intervention.  Results are displayed via the 16 x 2 line alphanumeric display. Connecting your 4 or 6 wire load cell is easy via the built-in connector’s rising clamp terminals

The case is made from tough ABS and is supplied with a rubberized cover, just in case it gets dropped !

View product

MRT Mini Torque Transducer - Miniature Reaction Torque Transducer

MRT Mini Torque Transducer

Miniature Reaction Torque Transducer

 

The Interface MRT is a miniature reaction torque cell offering the ability to measure small torque levels in a compact package with a high degree of accuracy.  Featuring proprietary Interface temperature compensated strain gauges, this torque cell offers excellent linearity and repeatability with low deflection and high torsional stiffness

View product

MRT2 Mini Flange Transducer - Miniature Flange Style Reaction Torque Transducer

MRT2 Mini Flange Transducer

Miniature Flange Style Reaction Torque Transducer

The Interface MRT2 is a miniature reaction torque cell offering the ability to make small torque measurements in a compact package with a high degree of accuracy and overload protection to 3x on the 2 lower capacity units.  Featuring proprietary Interface temperature compensated strain gauges, this torque cell offers excellent non-linearity, hysteresis and non-repeatability with low deflection and high torsional stiffness.

View product

MRTP Mini Flange - Miniature Flange Style Reaction Torque Transducer

MRTP Mini Flange

Miniature Flange Style Reaction Torque Transducer

The Interface MRTP is a miniature reaction torque cell offering the ability to make small torque measurements in a compact package with a high degree of accuracy and 7X over load protection.  Featuring proprietary Interface temperature compensated strain gauges, this torque cell offers excellent non-linearity, hysteresis and non-repeatability with low deflection and high torsional stiffness   

View product

RT10E High Capacity  - High capacity shaft style rotary torque transducer

RT10E High Capacity

High capacity shaft style rotary torque transducer

The Interface RT10E has some class leading features to make it possibly one of the best high capacity rotary transformer torque transducers available.  A rugged design with 4 X capacity overload rating, 0.1% combined error, SAE sized Keyed shafts and integrated speed measurement all contribute to the RT10E’s highly accurate measurement under high overload conditions. 

The RT10E is available with optional on –board signalling to allow high level +/- 5V or +/- 10V output.  

View product

RT10F - High capacity flange style rotary torque transducer

RT10F

High capacity flange style rotary torque transducer

The Interface RT10F has some class leading features to make it possibly one of the best high capacity rotary transformer torque transducers available.  A rugged design with 4 X capacity overload rating, 0.1% combined error, Flange coupling faces and integrated speed measurement all contribute to the RT10F’s highly accurate measurement under high overload conditions. 

The RT10F is available with optional on –board signalling to allow high level +/- 5V or +/- 10V output.  

View product

RT12E High Capacity - High capacity shaft style rotary torque transducer

RT12E High Capacity

High capacity shaft style rotary torque transducer

The Interface RT12E has some class leading features to make it possibly one of the best high capacity rotary transformer torque transducers available.  A rugged design with 2 X capacity overload rating, 0.1% combined error, SAE sized Keyed shafts and integrated speed measurement all contribute to the RT12E’s highly accurate measurement under high overload conditions. 

The RT12E is available with optional on –board signalling to allow high level +/- 5V or +/- 10V output.   

View product

RT12F - High capacity flange style rotary torque transducer

RT12F

High capacity flange style rotary torque transducer

The Interface RT12F has some class leading features to make it possibly one of the best high capacity rotary transformer torque transducers available.  A rugged design with 2 X capacity overload rating, 0.1% combined error (optionally enhanced to 0.07%), flange style mounting and integrated speed measurement all contribute to the RT12F’s highly accurate measurement under high overload conditions. 

The RT12F is available with optional on –board signalling to allow high level +/- 5V or +/- 10V output.   

View product

RT13L & RT14L - Low Capacity Rotary Torque

RT13L & RT14L

Low Capacity Rotary Torque

The RT13L and RT14L are low capacity rotary torque transducers offered with either 2x or 4x capacity overload protection while offering a high degree of accuracy.  These transducers also have a very high degree of immunity to magnetic fields due to ferrite free transformer couplings and titanium shaft

View product

SGA Signal Conditioner  - AC/DC Millivolt to Analog Converter

SGA Signal Conditioner

AC/DC Millivolt to Analog Converter

The SGA-A is a high-performance strain gauge signal conditioning amplifier that’s idea for use with load cells, force, pressure and torque sensors. 

The SGA-A is versatile amplifier that can provide excitation voltage to up to four transducers from a single channel. Output signal can be selected from 0-20mA, 4-20mA, 0-10V, 0-5V, ±5 V or ±10 V

The SGA is supplied in a IP67 environmentally sealed case, making it suitable for use away from the workshop or laboratory 

View product

SY038 Load Cell Amp - Load Cell Signal Amplifier

SY038 Load Cell Amp

Load Cell Signal Amplifier

The SY038 is a U.K. manufactured DIN rail mountable signal amplifier featuring user selectable sensitivity  

 

 

View product

T 1 Torque Coupling transducer  - Torque coupling rotary torque transducer

T 1 Torque Coupling transducer

Torque coupling rotary torque transducer

The Interface T1 is a Torque Coupling Rotary Torque transducer. It’s integrated flex disc coupling with a hollow, bearing-less design allows the shortest possible installed length. Add these features to it’s  15 bit resolution, a 10kHz sampling rate and  +/- 5VDC output  and we have the best device available in it’s class.

 

View product

T 2 Precision shaft style - Precision rotary shaft style torque transducer

T 2 Precision shaft style

Precision rotary shaft style torque transducer

The Interface T2 Precision Rotary Torque Transducer is a contact less design offering high accuracy via its digital electronics in a wide range of capacities from just 0.1Nm. These features, combined with options such as Speed and Angle Measurement, RS485 and High RPM (up to 20,000rpm) means the T2 is a high spec, flexible torque transducer.

View product

T 3 Precision with pedestal - Precision  rotary shaft pedestal style torque transducer

T 3 Precision with pedestal

Precision rotary shaft pedestal style torque transducer

The Interface T3 Precision, Pedestal Rotary Torque Transducer is a compact, contact less design offering high accuracy via its digital electronics in a wide range of capacities from just 0.1Nm. These features, combined with options such as Speed and Angle Measurement, RS485 and High RPM (up to 20,000rpm) means the T3 is a high spec, flexible torque transducer that can meet the requirements of a wide range of applications 

View product

T 4 General Purpose - General purpose rotary shaft style torque transducer

T 4 General Purpose

General purpose rotary shaft style torque transducer

The Interface T4 Precision, General Purpose Rotary Torque Transducer is a compact, contact less design offering high accuracy via its digital electronics in a wide range of capacities from just 0.1Nm. These features, combined with options such as Speed and Angle Measurement,10kHz sample rates, RS485 and High RPM (up to 20,000rpm) means the T4 is a high spec, flexible torque transducer that can meet the requirements of a wide range of applications 

View product

T 5 General purpose, pedestal - General purpose rotary shaft pedestal style torque transducer

T 5 General purpose, pedestal

General purpose rotary shaft pedestal style torque transducer

The Interface T5 Precision, General Purpose Rotary Torque Transducer is a compact, contact less design offering high accuracy via its digital electronics in a wide range of capacities from just 0.1Nm. These features, combined with options such as Speed and Angle Measurement,10kHz sample rates, RS485 and High RPM means the T5 is a high spec, flexible torque transducer that can meet the requirements of a wide range of applications  

View product

T 6 Dual Range - Dual range rotary shaft style torque transducer

T 6 Dual Range

Dual range rotary shaft style torque transducer

The Interface T6 is dual range rotary torque transducer available in capacities from 10Nm/ 1Nm all the way to 20,000Nm/ 2,000Nm.  The T6’s contact-less design features digital electronics, 5kHz sample rate +/- 5VDC output. All this makes the T6 an excellent choice when your application calls for a dual range device 

View product

T 7 Dual Range, pedestal - Dual range rotary shaft pedestal style torque transducer

T 7 Dual Range, pedestal

Dual range rotary shaft pedestal style torque transducer

The Interface T7 is dual range rotary torque transducer available in capacities from 5Nm/ 0.5Nm all the way to 10,000Nm/ 1,000Nm.  The T7’s contact-less design features digital electronics, 5kHz sample rate +/- 5VDC output and integral mounting base.  All this makes the T7 an excellent choice when your application calls for a dual range device 

View product

T 8 Eco - Shaft style rotary torque transducer

T 8 Eco

Shaft style rotary torque transducer

The Interface T8 Eco is a more cost effective Rotary Torque transducer designed to be a more economic alternative to some other devices that are available. But don’t think that it’s short on performance.  As this is an Interface device, its contact-less, stainless steel shaft design means that it’s still built to the same exacting standards as all our other force and torque devices.   

View product

T11 Bearingless - Bearingless rotary shaft style torque transducer

T11 Bearingless

Bearingless rotary shaft style torque transducer

The Interface T11 is a high speed bearing-less rotary torque transducer with a 10kHz sampling rate. This device is available in capacities from 0.005Nm to 150Nm with maximum speed up to 30,000RPM with an option to 40,000RPM makes this an ideal device when your application requires high speed and low torque.

View product

T12 Square Drive - Square drive rotary torque transducer

T12 Square Drive

Square drive rotary torque transducer

The Interface T12 Rotary Torque transducer features a  square drive shaft from 1/4 inch to 1 1/2 inch, depending on capacity. With capacities available from just 0.1Nm the feature packed T12 is a great choice when a square drive is dictated by your application.

The T12 is also available with the choice of analogue or USB output. The USB version is supplied complete with windows compatible data logging software

View product

T14 Slip Ring - Slip-ring shaft style rotary transducer

T14 Slip Ring

Slip-ring shaft style rotary transducer

The T14 uses high-reliability slip-rings to transfer power and signal to and from the rotating strain-gaged shaft. Industry standard mV/V allows use with standard strain gage instrumentation.

View product

T15 Hex Drive - Hex drive rotary torque transducer

T15 Hex Drive

Hex drive rotary torque transducer

The T15 features hex drive socket fittings. Applications include fastener testing, torque to turn, installation monitoring and torque vs. clamping force. The optional angle encoder allows 0.25 degree revolution. 

View product

T15-USB Output - Hex Drive Rotay Torque with USB

T15-USB Output

Hex Drive Rotay Torque with USB

The T15-USB is rotary torque transducer featuring hex drive and USB output to a PC. Applications include fastener testing, torque to turn, installation monitoring and torque vs. clamping force. The optional angle encoder allows 0.25 degree revolution.  

View product

T22 Pulley Style - Pulley style rotary torque transducer

T22 Pulley Style

Pulley style rotary torque transducer

The T22 is used for monitoring pulley torque, belt or chain tension, or anywhere a torque measurement needs to be made that includes a large radial load component. The contactless design features 0.1% combined error, high-level ±5V or ±10V analog output, 16-bit resolution and 3khz bandwidth. A remotely activated, internal shunt calibration resistor provides a known 5V calibration signal. Speed and angle can be measured with the optional encoder. 

View product

T23 LC  - Rotary Torque Transducer

T23 LC

Rotary Torque Transducer

 

The T23 LC is a compact, contact design, rotary torque transducer 

View product

T25 Rotary Torque - T25 Contactless Rotary Torque Transducer

T25 Rotary Torque

T25 Contactless Rotary Torque Transducer

 The T25 USB is a self-contained, contactles rotary torque transducer with the choice of +/-5VDC, +/-10VDC or or USB output. All version are available in capacities up to 30K RPM and 1KNM. The bearingless, contactless design eleininates bearing friction effects, enabling higher accuracy at greater speed

The USB version offers direct connection with your computer. Included software works for a variety of testing and monitoring applications where convenient data collection is required. 

View product

T27 Hollow Flange - Hollow flange rotary transducer

T27 Hollow Flange

Hollow flange rotary transducer

The T27 is a rotary torque transducer of a hollow flange design, this arrangement allows for attachment to a through shaft via a flange and no additional length being added to your test rig between the drive and test sample.

View product

T31, T32, T33 and T34 - Spindle Torque Transducer

T31, T32, T33 and T34

Spindle Torque Transducer

 The T31, T32, T33 and T34 are a range of flange mount rotary, spindle torque sensors that can offer the user advantages over other types of devices;  

  •   A very short axial length,
  •   Simple installation
  •   Integrated speed / angle measurement

 The T31, T32, T33 and T34 are all a contactless rotary devices offering torque measurement in capacities from just  1Nm to 500Nm at up to 2,000rpm. 

View product

Torque Couplings - Torque Couplings for Rotary devices

Torque Couplings

Torque Couplings for Rotary devices

We offer fittings for our complete range of Rotary torque transducers. These include single and dual flex couplings to fit either standard shaft, keyed shaft or flange type devices

Please down load the appropreate data sheets for your transducer or contact us for more information by emailing info@interface.uk.com or by phoning our sales engineers on 01344 776666.

View product

TQ2 Axial Torsion - Axial Torsion Force Transducer

TQ2 Axial Torsion

Axial Torsion Force Transducer

The TQ2 is a force transducer capable of measuring both force in either tension or compression (Fz) while simultaneously measuring the moments around those forces (Mz).  

View product

TQ7 Axial Torsion - Axial Torsion Force Transducer

TQ7 Axial Torsion

Axial Torsion Force Transducer

The TQ7 is a force transducer capable of measuring both force in either tension or compression (Fz) while simultaneously measuring the moments around those forces (Mz). 

View product

TR1  - Rod End Reaction Torque Transducer

TR1

Rod End Reaction Torque Transducer

The TR1 is designed to easily mount in-line between rods or tubes. The female end accepts a rod and the male end slips into a tube. Threaded holes in the female end and flats on the male end accommodate set screws. 

View product

TS11 Flange Style - Flange Style Reaction Torque Transducer

TS11 Flange Style

Flange Style Reaction Torque Transducer

The Interface TS11 is a flange style reaction torque transducer.  The thru-hole design with threaded mountings offers the user the easiest installation.  The TS11 is available a wide range of capacities from 10 to 20,000Nm to meet the widest range of applications  

View product

TS12 - Shaft style reaction torque transducer

TS12

Shaft style reaction torque transducer

Features of the TS12 include convenient shaft-style mounting using standard couplings. The compact design allows mounting in tight spaces where rotational clearance is at a minimum. Stainless steel shafts resist corrosion. 

View product

TS14 - Square drive reaction torque transducer

TS14

Square drive reaction torque transducer

The TS14 is a great transducer for checking torque and socket wrench calibrations. Its standard size socket makes it compatible with standard size socket drives

View product

TS15  - Square socket to flange style reaction torque transducer

TS15

Square socket to flange style reaction torque transducer

The TS15 features a flange on one side and a female square connection on the other. Useful for bench-checking socket style torque wrenches 

View product

TS16  - Square drive to flange style reaction torque transducer

TS16

Square drive to flange style reaction torque transducer

The TS16 features a flange on one side and a male square drive connection on the other. Useful for fastener testing where the flange can be mounted to the bench and the square connection can accept sockets. 

View product

TS17  - Hex drive reaction torque transducer

TS17

Hex drive reaction torque transducer

The TS17 accepts standard hex style screw driver bits, making it ideal for checking fastener torques and screw installation once final assembly is complete

View product

TS18 Shaft to Flange  - Shaft to flange style reaction torque transducer

TS18 Shaft to Flange

Shaft to flange style reaction torque transducer

The Interface TS18 is a reaction torque transducer with shaft to flange mounting for convenient installation.  Available in capacities from 5Nm to 5,000Nm and four body sizes to meet the widest possible range of applications  

View product

TS19 Short Flange - Short flange style reaction torque transducer

TS19 Short Flange

Short flange style reaction torque transducer

Interface's TS19 is a short flange style reaction torque transducer designed for easy installation when space is at a premium.  Featuring flange mountings both end, this high accuracy transducer is constructed from stainless steel to ensure reliability and accuracy

View product

TS20 - Hollow flange reaction torque transducer

TS20

Hollow flange reaction torque transducer

The TS20 is a flange mounted reaction torque transducer with a large through hole. This through hole is ideal for feeding electrical wire, pneumatic or hydraulic lines through the device. 

View product

TS21-Miniature - Miniature Shaft Style Reaction Torque Sensor

TS21-Miniature

Miniature Shaft Style Reaction Torque Sensor

The TS21 units are miniature reaction torque transducers with a maximum length of 70mm. Keyed shafts are a standard feature to ensure positive engagement with any couplings or fixtures. 

View product

TS22 Low Capacity - Low Capacity Reaction Torque

TS22 Low Capacity

Low Capacity Reaction Torque

The TS22 is an overload protected reaction torque transducer that offers accurate measurements from capacities as low as 0.005Nm with up to 5X capacity overload protection. This makes the TS22 ideal for testing medical devices or other low capacity applications

View product

TSQ High Capacity  - High Capacity, Reaction Torque Transducer

TSQ High Capacity

High Capacity, Reaction Torque Transducer

The Interface TSQ is a high capacity reaction torque transducer featuring male square drive both ends and safe overload to 2x capacity. Calibrated in both clockwise and anti-clockwise directions and in capacities up to 340k Nm, the TSQ offers high degree of accuracy for those large capacity torque measurements.

View product

WTS Wireless  - Wireless Transducer Comms

WTS Wireless

Wireless Transducer Comms

 

Developed for Medical, Aerospace, Automotive, and Manufacturing industry needs, the WTS wireless sensor communication system provides away to monitor forces where wires are difficult to manage or install. A load cell or torque transducer is attached to the WTS-AM transmitter, which uses an input of mV/V, ±5V, or 4-20mA and transmits a t2.4GHz output to the receiver. The receiver (WTS-BS) can be either a hand held with 6 digit indicator, or a USB / analogue device capable of logging data during the user’s tests.

View product

Random Product

BSC8,  8 channel digital Amp
BSC8, 8 channel digital Amp
Eight Channel Signal Amplifier

The BSC8 is a multi channel, digital signal amplifier which is the perfect partner to the Interface 6A, six axis force and torque transducer. It

View product View all products Download our catalogue Introducing the HRDT

Receive product updates, news and information.

This year is?